Pressure washing can be your most dependable resource in terms of rendering your house devoid of any filth that might have accumulated on it over the years, but there are a few things to keep in mind if you want to try to do it yourself. One of the most important things to think about in situations where you are about to pressure wash something or the other is your PSI setting, which refers to how much pressure the machine would be putting out at any given point in time.
A big part of the reason why that is the case has to do with the fact that a PSI that is too high during The Woodlands pressure washing can be disastrous in far more ways than we would care to count in any way, shape or form, and so you should be certain that your selected pressure level is adequate from all perspectives. In terms of washing a house, it would be best if your PSI was on the higher side of things. Don’t take it too high because you don’t want to ruin how your house looks from the curb which is a big part of its overall value, but don’t go too low either since this might fail to clean it properly.
The best PSI for house washing is around 3,000. This is the range at which dirt starts to flow off, but your paint and wood will remain intact for the most part. It’s not just about pressure, though. Distance from the surface, angle of the jets and the temperature of the water all come into play as well so optimize all of them.